Mon matériel

Acquis chez Adafruit

  • 1 x Powerswitch tail 2[ID:268] = $25.95
  • 1 x Membrane 1×4 Keypad + Extras[ID:1332] = $2.95

1332-00-keypad

  • 1 x Breadboard-friendly SPDT Slide Switch[ID:805] = $1.95
  • 1 x Half-size breadboard[ID:64] = $5.00
  • 1 x Buzzer 5V – Breadboard friendly[ID:1536] = $0.95
  • 1 x USB Powered Speakers[ID:1363] = $9.95
  • 1 x Adjustable Pi Camera Mount[ID:1434] = $4.95
  • 1 x 4-channel I2C-safe Bi-directional Logic Level Converter (BSS138) [ID:757] = $3.95

1875-00

  • 1 x Raspberry Pi Camera Board[ID:1367] = $29.95

397-03

  • 1 x Miniature WiFi (802.11b/g/n) Module: For Raspberry Pi and more[ID:814] = $11.95
  • 1 x TMP36 – Analog Temperature sensor (TMP36) [ID:165] = $2.00

161-00

  • 1 x Budget Pack for Arduino (Arduino Uno R3) (Uno w/328) [ID:193] = $49.50
    • Arduino Uno w/Atmega328
    • 3′ USB cable
    • Half-sized Breadboard
    • 65 flexible breadboard wires in 8 colors.
    • 1K & 10K potentiometer
    • 2 small pushbuttons
    • 5 bright red diffused LEDs (250mcd)
    • Red, green and blue ultra-bright LED
    • 5 100 ohm resistors
    • 5 1K resistors
    • 5 10K resistors
    • CdS photocell

193-00

  • 1 x Adafruit Assembled Pi Cobbler Breakout + Cable for Raspberry Pi[ID:914] = $7.95
  • 1 x 4GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy[ID:1121] = $9.95
  • 1 x Adafruit Pi Case- Enclosure for Raspberry Pi Model A or B[ID:1326] = $9.95
  • 1 x Raspberry Pi Model B 512MB RAM[ID:998] = $39.95
  • 3 x Piezo Buzzer (PS1240) [ID:160] = $4.50
  • 1 x USB 2.0 Powered Hub – 7 Ports with 5V 2A Power Supply[ID:961] = $21.95
  • 1 x Flex Cable for Raspberry Pi Camera – 24″ / 610mm[ID:1731] = $2.95
  • 1 x Premium Female/Male ‘Extension’ Jumper Wires – 40 x 6″ (150mm)[ID:826] = $7.95
  • 1 x MCP3008 – 8-Channel 10-Bit ADC With SPI Interface[ID:856] = $3.75

MPC3008

  • 1 x PIR (motion) sensor[ID:189] = $9.95

189-00

  • 1 x DHT22  temperature-humidity sensor + extras[ID:385] = $9.95

DHT22

  • 1 x Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout[ID:439] = $5.95

439-00

  • 2 x Pi GPIO Reference Board[ID:1432] = $5.90

1432-00

 

Laisser un commentaire

Votre adresse de messagerie ne sera pas publiée. Les champs obligatoires sont indiqués avec *